|
GENERAL
CARB.
ENHANCER
EFIE
HYCO
2A
HYCO
2DT
ER
HYZOR
...
ER
HyZor Operation
...
ER
HyZor Maintenance
...
Brown's
Gas (ER HyZor)
ELECTRONIC
DIVERTER
WATER
AS FUEL
WATER
INJECTION
FS
RECOMMENDATIONS
Click on
the PDF flowchart to make it easy to choose
Eagle-Research Combustion Enhancement
Technology (CET)
Vehicle
Fuel Efficiency PDF
Fuel
Saver's Log Form PDF
|
.
|
FS
RECOMMENDATIONS
1.
What Fuel Savers do you recommend for my
vehicle?
2.
What can I do to increase the efficiency of
my Carbureted vehicle?
3.
What can I do to increase the efficiency of
my Electronic Fuel Injected
vehicle?
4.
What can I do to increase the efficiency of
my Turbocharged Diesel Fuel Injected
vehicle?
5.
What can I do to increase the efficiency of
my normally aspirated Diesel Fuel Injected
vehicle?
6.
What other fuel savers do you
have?
7.
What else can I do to increase my vehicle's
efficiency?
8.
How much do I charge to Enhance someone's
vehicle?
9.
Do you recommend any particular
vehicle?
Q.
What Fuel Savers do you recommend for my
vehicle?
A.
To answer your questions faster and respect
our time, view the PDF flowchart and these
FAQ, then get back to
<techsupport@eagle-research.com> with
specific questions that are not addressed.
Here are some additional links to
help:
http://www.eagle-research.com/products/pfuels.html
http://www.eagle-research.com/fuelsav/FiveYrCalc.html
Top Of
Page
Q.
What can I do to increase the efficiency of
my Carbureted vehicle?
A.
Install the Carburetor Enhancer.
You can add
an electronic upgrade to the Carburetor
Enhancer, which will allows you to take
control of the fuel flowing FROM (not to)
your carburetor. Your float bowl stays full
of fuel for instant power at any time. The
ECE modifies the fuel output as you desire,
including a deceleration fuel shutoff option.
ECE plans are included with the Carburetor
Enhancer Manual.
Apply a fuel
pressure regulator just before the fuel
enters your carburetor. This will reduce the
float bowl flooding problem that ALL
carburetors have due to float bounce in the
float bowl, leaky floats, bad inlet needle
valves, etc.
Apply a
'diesel' style fuel filter before your
pressure regulator. This will help prevent
the float bowl flooding problem that is
caused by a tiny bit of matter preventing the
needle valve from completely closing.
Ordinary gasoline filters are NOT good
enough. A tiny bit of dirt you can't even see
could waste gallons of fuel.
Then refer
to:
Q.
What other fuel savers do you
have?
Q.
What else can I do to increase my vehicle's
efficiency?
Top Of
Page
Q.
What can I do to increase the efficiency of
my Electronic Fuel Injected
vehicle?
A.
No matter what combustion enhancement
technology you use (ours or anyone else's),
you must ALWAYS install one EFIE on each
oxygen sensor located before the catalytic
converter(s) or you are likely to lose
mileage.
Then refer
to:
Q.
What other fuel savers do you
have?
Q.
What else can I do to increase my vehicle's
efficiency?
Top Of
Page
Q.
What can I do to increase the efficiency of
my Turbocharged Diesel Fuel Injected
vehicle?
A.
Install the EFIE device on each of your
oxygen sensors, if you have any.
Install a
pressure-vacuum gauge/pyrometer on your dash
(or on the steering column). This gauge will
tell you what is happening to your engine and
you can modify your driving habits to achieve
maximum efficiency and performance. It also
can tell you many things about your engine
and becomes a valuable tool to applying
combustion enhancement
techniques.
Insulate
your exhaust system up to but not including
your turbo. The extra heat retained in the
gas going to the turbo will increase it's
power by as much as 10%.
Apply the
HyCO 2DT. This system (that you build
yourself) is specifically designed to install
on turbocharged engines and has been proven
by independent testing by CAT and Perkins to
increase the power by 10%, while reducing
fuel consumption by 10% and reduces harmful
emissions significantly.
Then refer
to:
Q.
What other fuel savers do you
have?
Q.
What else can I do to increase my vehicle's
efficiency?
Top Of
Page
Q.
What can I do to increase the efficiency of
my normally aspirated Diesel Fuel Injected
vehicle?
A.
Install the EFIE device if you have an oxygen
sensor.
Then refer
to:
Q.
What other fuel savers do you
have?
Q.
What else can I do to increase my vehicle's
efficiency?
Top Of
Page
Q.
What other fuel savers do you
have?
A. The HyCO
2A system is a simple technique to vaporize
some of your gasoline using an evaporation
principle. The vapor gasoline assures
reliable and efficient combustion in your
engine. A Basic Kit is available.
The HyZor
Technology Manual tells you how-to-build an
onboard electrolyzer (hydrogen generator)
that will do an excellent job of increasing
your combustion efficiency. A Basic Kit is
available.
Here is a
chart to compare the ER HyZor and the HyCO 2A
techniques.
Top Of
Page
Q.
What else can I do to increase my vehicle's
efficiency?
A. Add Water
Injection. It can be a simple vacuum
induction system (build for under $5) or it
could be an 'active' system that adds more
water as the engine goes under load. Water
injection keeps the engine clean, enhances
fuel combustion and reduces harmful
emissions. See Water Injection' and 'Super
Gas Saver Secrets' books for full details on
adding water injection.
Water
injection, combined with the HyZor allows you
to replace a significant percentage of your
fossil-fuel with water; in a manner that
increases efficiency and
performance.
Apply
controlled fuel preheat. Done properly, this
vastly enhances the evaporation of the fuel.
For every fuel system, there is a maximum
efficient temperature (not too hot or too
cold). Insulate your fuel system from the
fuel line coming into the fuel compartment to
the carburetor and then put in a
thermostatically controlled fuel heater
(heated by electric/engine coolant) to keep
the fuel heated precisely. Experiment to find
your optimum. Can start at about 160°F,
a degree difference could mean 2 or 3 mpg
difference. See 'Super Gas Saver Secrets'
book.
Install a
vacuum gauge on your dash (or on the steering
column). These gauges can be bought in your
local automotive supply store or from JC
Whitney by mail order. A vacuum gauge will
tell you what is happening to your engine and
you can modify your driving habits to achieve
maximum efficiency and performance. A vacuum
gauge also can tell you many things about
your engine and becomes a valuable tool to
applying combustion enhancement
techniques.
Top Of
Page
Q.
How much do I charge to Enhance someone's
vehicle?
A.
For the Basic Version of the Carburetor
Enhancer we recommend $20 to test
the
carburetor with the colortunes, $20 to
install the Carburetor
Enhancer,
$20 to custom tune the Carburetor Enhancer
and $15 for the
parts. We
charged $20 per hour for rebuilding
carburetors that failed the
colortune
test.
For the
EFIE, we recommend $50 installation and
adjustment charge.
We have not
worked out recommendations for the other fuel
savers yet.
Top Of
Page
Q.
Do you recommend any particular
vehicle?
A.
The vehicle you choose for yourself is
entirely dependent on your situation, as per
our 'Super Gas Savers Book'. Obviously we
recommend high efficiency. Any vehicle you
choose can be upgraded with our
technology.
I like
turbocharged diesels because they are
efficient, long lived and can use vegetable
oils as fuel.
We presently
drive a 1983 Honda Civic and a 1984 Volvo
Station wagon because these are the vehicles
that fit our present needs and we believe in
maintaining vehicles to get full value from
them.
|
