|
Chat
Home
Full
archive List is on the Chat home
page.
To
email Eagle-Research:
|
.
|
Welcome
free thinkers :)))
Chat
subject: H.E.A.T.
Technology
The
Chat we've been using is glitchy, I
apologize for that.
Further,
reading the resulting conversation
is not easy because answers to
various questions are mixed
together. This time I have tried to
enhance the reading experience by
re-organizing the text, so you'll
see the time stamps out of order.
I've also corrected some obvious
spelling errors and
(I'm
adding appropriate information in
parenthesis).
****************************************************
|
|
We
do NOT give out your personal
information without your permission.
This is a standard Eagle-Research
policy.
|
|
09:29:37
[rono] Hi, I got 1 of your
EFIE controls but haven't yet
installed it on my 97 3.0 V-6 Dodge
Caravan. Do I have 2 oxygen sensors?
Do I need 2 EFIE's?
(Yes)
10:04:12
[rono] Is anyone
there?
11:27:43
[gsgkill] any one
here?
11:10:55
[gsgkill] ok what is H.EA.T.
?
11:31:45
[George] H.E.A.T. stands for
Heat Energy Available Today. It
addresses technology for making
machines/apparatus/thermodynamic
cycles for making practical power
from small ambient/environmental
temperature differences.
11:32:32
[George] I was just checking
in. I'll see you guys in 3 hours and
20 minutes
11:49:52
[POCOSTEEP] HELLO
ALL
11:51:23
[POCOSTEEP] rince>
HELLO
11:52:25
[POCOSTEEP] FRIENDLY
ROOM
12:08:31
[POCOSTEEP]
rince>
14:08:53
[POCOSTEEP] HELLO
ALL
14:11:07
[POCOSTEEP] IS THIS THING
WORKING CAN ANYONE SEE WHAT I AM
WRITING
14:12:19
[gsgkill] yes
14:13:03
[POCOSTEEP] MY TEST CAR I AM
WORKING ON TO IMPROVE MILEAGE IS A
1986 HONDA ACCORD
14:13:58
[gsgkill] are you using
hydrogen
14:14:35
[POCOSTEEP] I HAVE NOT FOUND
A SUITABLE METAL THAT HOLDS UP TO
THE ELECTROLISYS
14:15:04
[POCOSTEEP] MINE WILL USE
HYDROGEN THAT IS MADE AND FED INTO
THE THROTTLE BODY
14:15:17
[POCOSTEEP] GOT ANY
IDEAS
14:15:40
[gsgkill] yes, I just eat a
set of stainless again
today
14:16:46
[gsgkill] if you can get
pure stainless never heat it to cut
it, it takes and changes it to rust
and eating up
14:17:37
[POCOSTEEP] YES BUT
STAINLESS IS NOT VERY GOOD CONDUCTOR
AND YOU LOSE ALOT OF CURRENT AS HEAT
BUILD UP IN THE
ELECTRODES
14:17:51
[gsgkill] I used pickel
juice yesterday and watch the bubble
boil
14:18:24
[POCOSTEEP] I HAVE PURE
STAINLESS
14:19:01
[gsgkill] I used later
imitation salt Potassium Chloride it
works well
14:19:35
[POCOSTEEP] I HAVE BEEN
EXPERIMENTING WITH SODIUM
HYDROXIDE
14:20:06
[gsgkill] I built the 19
hertz square wave generator 1/3 amp
and that works well
14:20:33
[gsgkill] inreferance to a
patent which uses the
circuit
14:20:57
[gsgkill] I'm more
interested in home use of
hydrogen
14:21:21
[POCOSTEEP] THEY ARE BOTH
GOOD IDEAS
14:21:43
[POCOSTEEP] WHERE CAN I FIND
READING ABOUT YOUR 19 HERTZ
GENERATOR
14:23:14
[gsgkill] I've come to the
conclusion that for home use you
need to use a large amount of water
and keep fresh water cirulating in
front of the plates. Becasue of the
impurities in the water. That is my
next project
14:23:52
[POCOSTEEP] MAKES SENSE OF
THE IMPURITY PROBLEM
14:23:58
[gsgkill] I have save it to
my computer if you want I can send
it to you
14:24:45
[gsgkill]
http://www.xoygen.com is the
orginator or xygen.com I don't
remember for sure
14:24:53
[POCOSTEEP] YES THAT WOULD
BE VERY HELPFUL
14:25:17
[POCOSTEEP] THAT LINK DID
NOT WORK
14:25:31
[gsgkill] But a site listed
it a year ago as a tried and working
system. I downloaded it and saved
it
14:25:52
[gsgkill] let me look i have
it on favorites
14:29:41
[POCOSTEEP] DID YU TRY
CLICKING ON THAT LINK TO SEE IF IT
WOULD WORK FOR YOU IT WON'T WORK FOR
ME
14:31:21
[gsgkill] yes it does not
work
14:35:20
[POCOSTEEP] CAN YOU TYPE THE
ADDRESS IN ON HERE
14:37:19
[gsgkill] yes. I'm looking
for the article on my computer it
gives the patent number and i'll
copy and paste it
14:38:30
[POCOSTEEP]
GREAT
14:45:00
[studabak] If George gets
here would some one tell him
studabak can't be here, an urgent
matter has prevented myself from
being here..... and I had a lot to
share.... got'ta go now....
bye
14:45:55
[studabak] ?
14:46:09
[POCOSTEEP] OK
14:46:15
[POCOSTEEP] I
WILL
14:46:49
[studabak]
thanks
14:49:59
[JetA] Hello
everyone
14:50:11
[POCOSTEEP]
HELLO
14:53:32
[JetA] what do those little
people icons mean next to some of
the names in the upper right hand
corner?
14:59:10
[Tenaj] icons, in upper
right hand corner by people's names,
mean that they set themselves up
with a profile before entering the
chat room
14:55:09
[Tenaj] Good afternoon
everyone. Welcome to the
Eagle-Research Mar 22/03 chat with
George Wiseman
14:57:14
[Tenaj] Today's subject:
H.E.A.T. Technology. We'll chat 'til
3:00 PST . . . then see if we people
want to continue
15:23:18
[POCOSTEEP] George> A
messeage from Studabak
[studabak] If George gets
here would some one tell him
studabak can't be here, an urgent
matter has prevented myself from
being here..... and I had a lot to
share.... got'ta go now....
bye
14:55:32
[George] Hi everyone, I see
that studabak couldn't
stay.
14:55:54
[JetA] Good
afternoon
15:02:19
[Tenaj] hey there kidmarc.
Glad yu could join us
15:02:48
[kidmarc] Hi Tenaj. Thank
you
15:02:50
[Tenaj] good afternoon
ianscade
15:04:29
[Tenaj] good afternoon
mhughes
15:04:45
[Tenaj] hello
joe6966
15:05:26
[joe6966] hello Tenaj, Joe
Huard here.
15:05:53
[Tenaj] Hey (((Joe))) How
are ya?
15:06:41
[joe6966] I'm fine, except
I'm still waiting (tap, tap) for my
package.
15:06:56
[mhughes] Hi Tenaj Hi
George!
15:06:56
[ianscade] Hi Tenaj, this is
my first time in a chat room, just
interested too hear what's going
on
15:07:43
[joe6966] Fine, and
waiting!
15:07:44
[Pat] Are there any plans
for another Browns gas
meeting?
15:08:35
[Tenaj] No firm plans for
another Brown's Gas meeting at this
time.
15:09:35
[Tenaj] With Brown's Gas we
are in the beginning stages of
putting together a 'big' package
filled with information on CD
etc.
15:10:00
[Tenaj] With Brown's Gas,
things are getting even more
exciting by the day.
15:10:58
[Tenaj] There's more and
more info popping up about the
healing applications of Brown's Gas.
Got another 2 calls just this last
week with more info.
14:56:33
[George] Does everyone here
know what HEAT technology
is?
14:57:21
[gsgkill] still
looking
14:57:31
[gsgkill] no
15:02:00
[gsgkill] as in piston push
by expanding coolent?
14:57:25
[JetA] Heat Energy Available
Today?
14:58:48
[JetA] low temerature phase
change
14:57:30
[POCOSTEEP] I'M NOT
SURE
14:57:55
[Dafydd23] Read it ,
remember some
15:07:57
[Tenaj] Glad you could make
it mhughes. Ever time here is
different. Depends on the
crowd!
14:57:46
[George] H.E.A.T. stands for
Heat Energy Available Today. It
addresses technology for making
machines/apparatus/thermodynamic
cycles for making practical power
from small ambient/environmental
temperature differences.
11:32:35
[gsgkill] is there a
Web-site on it?
14:09:12
[gsgkill] anybody have info
on HEAT a Web-site to study
upon
(H.E.A.T.
technology is the name we use for
research done specifically by
Eagle-Research. There are many
places in the world that are
beginning to use similar technology.
Example websites donated by Marcus
and Gary:
http://cooltech.iafrica.com/science/219667.htm
http://www.xenesys.com/english/news.html
http://www.nrel.gov/otec/
http://www.infinite-energy.com
I
have heard rumors of large prototype
powerplants based on gathering
energy from ocean temperature
differences being built in Australia
and Hawaii. )
15:01:25
[Tenaj] Does anyone
currently have an application for
HEAT technology that they want
specific help from George
with?
15:01:33
[George] Can each of you
tell me what you expect to learn
today?
15:01:55
[POCOSTEEP] WOULD A HOME
FURNACE COUNT IN YOUR DESCRIPTION OF
HEAT FOR MAKIING HEAT
15:06:30
[George] POCOSTEEP- H.E.A.T.
technology isn't specifically for a
furnace design or for making
heat.
15:07:18
[POCOSTEEP] OKAY TELL US
ABOUT WHAT IS IS GOOD FOR
THEN
15:07:33
[POCOSTEEP] PRACTICAL
APPLICATIONS
15:01:06
[George] I research H.E.A.T.
because it represents a possible
FREE ENERGY source
(The
keys to making H.E.A.T. systems
practical are:
1)
Find/develop a thermodynamic cycle
that will operate efficiently with a
temperature difference of only
20°F.
2)
Develop an engine that will operate
efficiently on above
cycle.
Eagle-Research
is experimenting with a novel
thermodynamic cycle we call 'Wise
Cycle' and an engine designed to
operate on it. These are described
in the 'Wise Cycle
Report'.)
15:10:06
[POCOSTEEP] OKAY MAKING
POWER IN WHAT WAY
15:03:10
[George] H.E.A.T. starts
with the assumption that it is
possible to make practical power
from small differences in
environmental temperatures, like
between water and air.
15:10:35
[George] So, what we are
searching for is thermodynamic
cycles that will be efficient with
small temperature
differences.
15:11:01
[POCOSTEEP] MAKING
ELECTRICAL POWER EXPLAIN ONE
WAY
15:07:30
[George] we take heat from
the environment to make power, like
to turn a generator and make
electricity.
15:15:38
[George] POCOSTEEP- If you
have a heat sink, like a lake, there
will often be at least a 20°
temperature difference between it
and the air with the temperature
difference, one can run a
thermodynamic engine
15:17:16
[POCOSTEEP] I UNDERSTAND
THAT PART NOW HOW CAN THAT BE USED
TO GENERATE ELECTRICITY.
15:08:59
[George] H.E.A.T. technology
engine is a prime mover. the
thermodynamic engine can turn any
device, like a water pump, a
generator or a heat pump. It is good
for making power, which can be
electrical, to power your home. You
can turn that electrical power into
heat but it'd be better to power a
heat pump.
15:21:17
[George] POCOSTEEP- The most
important thing is to find a
thermodynamic cycle and engine that
is efficient with low delta
T
15:02:57
[JetA] Have you done any
more research above the HEAT 1,2+3
books?
15:04:07
[Tenaj] The Wise Cycle
Report comes after HEAT 1, 2,+
3
15:03:40
[JetA] can any of this be
applied now with off the shelf
components?
15:12:03
[George] JetA- Yes, all my
technology uses basically off the
shelf components. Obviously, there
would be some custom parts but
nothing exotic.
15:14:42
[POCOSTEEP] George> OFF
THE SHELF COMPONENTS FOR GENERATING
ELECTRICITY TO BE MADE AND USED IN A
HOME IS WHAT YOU ARE SAYING
CORRECT?
15:20:06
[George] POCOSTEEP- Yes,
HEAT technology can be put together
with 'off the shelf'
components
(I've
designed the Wise Cycle 'engine' to
be put together using
'off-the-shelf' components. Any
component needing to be custom built
is within any machine shop
capability.)
15:03:03
[rince] Do you have any
first hand knowledge of the Minto
Water Wheel?
15:07:03
[Tenaj] George does not have
first hand knowledge
(experimentation) with the Minto
Water Wheel. He has done a lot of
research and has some ideas on how
to make it more
efficient.
15:10:52
[mhughes] POCOSTEEP! STOP
YELLING (Turn off
CapsLock)
14:57:54
[POCOSTEEP] I CAN'T READ
WELL SO THAT IS WHY I TYPE IN LARGE
LETTERS
15:11:58
[POCOSTEEP] I'M 5 INCHES
FROM THE SCREEN TO SEE WHAT YOU ARE
ALL SAYING
15:11:10
[POCOSTEEP] I CAN'T READ
VERY WELL I CAN'T SEE
15:11:23
[mhughes] ok
15:12:46
[mhughes] my
apologies...
15:13:07
[POCOSTEEP] ITS
OKAY
15:13:12
[POCOSTEEP] I GET THAT A
LOT
15:15:41
[joe6966] I sent 2 messages,
but they didn't arrive.
15:16:22
[Tenaj] 2 messages here in
the chat, Joe?
15:16:58
[joe6966] yes, I answered
you twice, and nothing happened in
this chat.
15:17:33
[joe6966] Yes, I answered
you 2 times in this
chat.
15:18:10
[joe6966] Hitting "Enter"
doesn't Send, but
Deletes.
15:18:26
[Tenaj] Sorry Joe. I keep
getting clitchy things happening
here too.
15:18:29
[joe6966] But I only did
that once.
15:19:01
[Tenaj] Sometimes, the
program won't let me send. Try
pressing the send button or hitting
return.
15:19:19
[Tenaj] This chat program
works best in internet
explorer.
15:19:55
[Tenaj] And we are in the
midst of setting the chat up from
eagle-research.com - hopefully, for
next time.
15:20:01
[joe6966] IE 6.0 is what I'm
using.
15:20:35
[joe6966] Another message
just got dropped.
15:20:49
[JetA] I am in Internet
Explorer (Windows) and don't seem to
have any trouble.
15:21:24
[Tenaj] Not sure how I can
help you Joe. Maybe exit; quit the
program and reenter???
15:20:51
[joe6966] bye
15:21:33
[JetA] bye joe
15:21:39
[ianscade] an observation
for Joe - you don't show up as being
in the room, but are
communicating
15:21:54
[joe6966] I'm on the list at
the right of my screen.
15:22:28
[Tenaj] try leaving and
re-entering, okay?
15:24:14
[Tenaj] Hey Joe. You're
back. Can you hear me?
15:25:51
[joe6966] I see my dropped
messages are there now.
15:31:55
[Tenaj] Sorry everyone! For
some reason, this program is NOT
delivering all of what George and/or
I are saying.
15:32:28
[Tenaj] We are trying to
make small enough sentences, but
sometimes that is not working
either.
(I
think some messages arrive at the
same time and the program only shows
one, when I later view the messages
they are all there. I've cut out
most of the duplicates.)
15:32:56
[POCOSTEEP] working fine
over here in Indiana
15:33:25
[JetA] Tenaj - what you are
saying seems to come
through
15:33:41
[JetA] not getting much from
George
15:41:39
[joe6966] JetA How do you
know that what she is saying is all
coming through?
15:33:55
[Tenaj] Thank you JetA, but
Not always - some of what I and
George have said has Not come
through
15:34:02
[Dafydd23] you both seem to
be making sense
15:34:07
[ianscade] working fine in
Uk, but don't understand why some
people on the list have a head &
shoulders to the left of the name
and others don't.
15:34:30
[POCOSTEEP] correct what is
up with that
15:35:00
[Tenaj] the 'head &
shoulders (icon) is if the person
made a profile before entering the
chat room
15:26:38
[joe6966] Tenaj, I sent you
an email this week.
15:29:08
[joe6966] Tenaj, What's up,
I was going to order a ER1200, and
I'm still waiting for my "package"
you said was going to be mailed 4
weeks ago.
15:27:35
[Tenaj] I'm behind on
emails, Joe. Been without email
capability for almost 4
weeks
15:28:21
[Tenaj] Some company took
over our local server and moved
things away without our consent or
even knowledge. I'm trying to catch
up on emails as quickly as I can.
They seem to have been lost in cyber
space for the last couple of weeks.
And now I am over
loaded.
15:19:03
[mhughes] George- Do you
have anything new on HEAT (that is
NOT in the 3 books) that you would
like to share?
15:26:59
[Tenaj] The Wise Cycle
Report is now included with HEAT
Technology 3
15:20:07
[POCOSTEEP] YOUR WEB SITE
BOOKS TELLS HOW TO EFFECTIVELY BUILD
A DEVICE FOR MAKING
ELECTRICITY
15:27:33
[JetA] George - Have you
built a working prototype of the
Wise Cycle?
15:27:50
[George] POCOSTEEP- Yes, the
Wise Cycle Report will tell you
enough that you can build a device.
It is not detailed plans and I have
not built one myself. However, this
is how I am going to build
it.
15:28:40
[George] POCOSTEEP- So the
Wise Cycle is my best thinking (at
the moment) and is how I'm going to
proceed. In fact, one of the reasons
we chose where we live is because it
is next to a very large and deep
lake. We will be able to power the
entire valley from heat stored in
the lake. The colder or hotter the
air gets the more power our machine
will make.
15:28:19
[JetA] I've read your Wise
Cycle Report - It sounds very
promising
15:23:06
[George] mhughes- A very
important thing that I have
discovered in my thermodynamic
research is that any thermodynamic
cycle that uses Phase Change is too
inefficient to work with H.E.A.T.
technology. That's why I've been
researching single phase cycles;
like the Sterling and Erikson
cycles
15:26:16
[George] mhughes- My
research led me to develop a new
cycle I call the Wise Cycle.
(It
is a single phase gas cycle that
puts the expanding/contracting gas
in direct contact with heat exchange
fluids, thereby reducing
inefficiencies, expences and time
delays caused by temperature drops
across heat exchangers.)
15:34:12
[George] The Wise Cycle
should work much more efficiently
because
15:35:05
[George] 1) we are heating
and cooling the working fluid
directly, not using a heat
exchanger
15:36:46
[George] 2) and we are
expanding and contracting a single
phase gas, like nitrogen
15:29:24
[gsgkill] is it on your
web-site? the Report?
15:32:25
[gsgkill] George is the wise
cycle report on your
web-site?
15:29:51
[Tenaj] The Wise Cycle
Report is available for ordering
from the eagle
website
15:38:53
[gsgkill] george would not
need constant temp
change?
15:40:14
[George] gsgkill- The Wise
cycle needs at least a constant
20° temperature difference. The
temperature difference can be
greater. The greater the temperature
difference, the more power you can
make.
15:41:53
[gsgkill] Wouldn't a lake
maintain a constant temp for to
long?
15:43:15
[gsgkill] I probably need to
read your paper
15:49:47
[gsgkill] Where can I read
your paper?
15:42:56
[George] gsgkill- The Wise
Cycle needs a 'heat sink' and a
'heat source' In this example, the
lake is one and air is the other. In
the winter, the lake is warmer than
the air, In the summer, the lake is
colder than the air. So in the
winter, the lake is source and air
is sink and in the summer, the lake
is sink and air is source. In the
summer, you can really cook with a
solar parabolic source.
15:44:04
[gsgkill] ok
15:46:26
[gsgkill] are you using the
expanding gas to do work
(yes)
15:41:54
[JetA] between which two
parts do you need the 20 deg
difference? before and after the
power stroke?
15:47:12
[George] JetA- between the
heat sink and heat source. So in the
winter, we take heat from the lake
and put it into the air. As the heat
moves through the machine, it
produces power
15:49:16
[JetA] George - OK I
understand
15:49:54
[George] The Wise Cycle
expands the gas in the heat
source
15:51:19
[gsgkill] then compress it
again in the cool
source?
15:50:50
[George] The Wise Cycle
contracts the gas by spraying a
liquid mist into the
cylinder
15:45:33
[JetA] OK - I understand the
difference now.....
15:51:38
[George] Are there any more
questions?
15:52:06
[JetA] George - you
mentioned single phase - does that
mean the gas you are using using
will stay as a gas during the entire
cycle from source to
sink?
15:52:24
[George] JetA -
exactly
15:53:35
[Tenaj] JetA -
exactly!
15:52:29
[POCOSTEEP] can you be more
specific with you answers on how
this change happens
15:55:25
[George] POCOSTEEP- Going
into specific detail (in this
medium) on the Wise Cycle is too
involved. It is all detailed in the
Wise Cycle Report
15:58:13
[POCOSTEEP] ok
15:54:22
[Tenaj] Again, some of
George's answers/comments are Not
getting through. Thank you for your
patience.
15:54:44
[POCOSTEEP] gsgkill> Did
you find that web
address
15:55:30
[gsgkill] no
15:57:22
[Tenaj] Just about time to
finish up.
15:57:49
[Tenaj] What subject would
you like to chat about next
time???
16:00:15
[Tenaj] Next chat: Saturday
May 24/03 @ 2pm PST
16:05:32
[Tenaj] this chat will be
posted at the eagle site within 24
hours
(OK,
that didn't happen J it was posted
April 8, 2003)
15:41:29
[Dafydd23] George, can you
get the temp difference from earth
and air
(yes,
but ground does not conduct heat
very quickly, so you'd need a huge
heat exchanger. Water is the most
practical application.)
15:58:30
[Dafydd23] Thank you very
much George!!
15:58:39
[George] I was using a lake
as an example. The Wise Cycle works
with and needs two places you can
get a consistent temperature
difference of at least 20°F.
You can set up an apparatus to burn
waste material and create power from
that too.
16:01:28
[ianscade] tenaj - looking
forward to receiving all my
books
16:01:36
[Tenaj] ianscade, you have
placed an order?
16:01:38
[POCOSTEEP] that was really
facinating wasn't it people I sure
learned a lot!
16:01:44
[JetA] I imagine not much
heat needs to be made for this to
work well, as in burning waste or
even recover the waste heat that
goes up the chimney from the
furnace.
(Actual
heat volume needed is still the same
as ever, or even more, depending on
the efficiency of the thermodynamic
cycle and it's associated engine.
What we are looking for is large
amounts of available heat (enthalpy)
with low temperature differences
(delta T).
(Recovering
waste heat or acting as a 'bottoming
cycle' for an existing thermodynamic
engine are excellent applications
for this technology.)
16:02:07
[gsgkill] heat and cold,
such as a deep well and in the
ground just below the frost
line
[George]
did I answer everyone's
questions?
16:03:29
[Dafydd23] Good for
now
16:03:50
[JetA] George - YES! Thank
you!!
16:04:22
[Tenaj] C U next time
everyone. Bye for now.
16:04:38
[George] I enjoyed this time
guys, See you next time
16:04:47
[kidmarc] Ciao George and
Tenaj!
16:04:56
[JetA] Good Bye
16:05:49
[JetA] Good night
everyone
16:07:37
[POCOSTEEP] really
interesting huh guys
16:08:00
[kidmarc] Would have spoken
more, but I was just
listening
16:08:07
[POCOSTEEP] I can't wait
till next time. The rest of you will
have to tell me how it
goes
16:08:24
[gsgkill] POCOSTEEP ill find
that article when i dont need it ill
find it
16:09:00
[POCOSTEEP] okay if you want
you can email it to
orionism42@aol.com
16:10:02
[gsgkill] ok
16:11:03
[POCOSTEEP] did anyone else
get the feeling you have to buy the
book to find out
anything
16:11:52
[gsgkill] well
yes
16:12:39
[gsgkill] the aaish ake a
piston driven fan using helium same
gas expand and compress
16:12:47
[gsgkill] amish
16:12:50
[POCOSTEEP] I thought it was
interesting that a working protitype
was not made
16:13:28
[POCOSTEEP] aaish ake
<-------what is that
16:13:45
[gsgkill] Amish
16:13:56
[POCOSTEEP] okay
16:13:59
[gsgkill] my M's
stick
16:14:26
[POCOSTEEP] I see
that
16:14:32
[POCOSTEEP] Are you in the
USA
16:14:44
[gsgkill] they put the fa on
a wood stove and it runs as long as
heat is applied
16:15:02
[gsgkill] my N's stick
to
16:15:10
[POCOSTEEP] They put the
fan
16:15:17
[POCOSTEEP] What kind of a
fan
16:15:17
[gsgkill] i need a new key
board
16:15:26
[POCOSTEEP]
electric
16:15:43
[gsgkill] no
16:15:57
[POCOSTEEP] what
then?
16:16:22
[gsgkill] compressed the
heat expands the gas the next stroke
compresses it again
16:17:06
[POCOSTEEP]
mmhhhh
16:17:12
[gsgkill] they have a
website to
16:17:27
[POCOSTEEP] you got that
one
16:17:55
[gsgkill] no it's about
$200.00
16:18:16
[gsgkill] lemans
16:18:37
[POCOSTEEP] what is
lemans
16:18:38
[gsgkill] somthing like
lemans.com
16:19:30
[POCOSTEEP] I tried that
one
16:19:44
[gsgkill] where you can by
the fan
16:19:48
[POCOSTEEP] it works but I
don't think it it what you are
talking about
16:20:16
[POCOSTEEP] The fan works on
compressed helium and heat from a
stove
16:20:52
[gsgkill] yes
16:22:48
[POCOSTEEP] email me
sometime we can talk more about
this
16:23:05
[POCOSTEEP] You wrote it
down correct
16:23:17
[gsgkill] ok
16:23:47
[gsgkill] what
16:24:38
[POCOSTEEP]
orionism42@aol.com
16:24:41
[gsgkill]
http://www.lehmans.com
16:25:19
[gsgkill] just did a web
search the address of lemans wrong
spelling
16:30:18
[gsgkill]
http://www.lehmans.com/shopping/product/detailmain.jsp?itemID=306&itemType=PRODUCT&RS=1&keyword=fan
16:30:34
[POCOSTEEP] okay you have a
nice day
16:31:36
[gsgkill] you to
16:39:30
[gsgkill]
http://ms101.mysearch.com/jsp/GGmain.jsp?searchfor=xogen&searchBtn=Search
19:02:53
[studabak] hello
?
19:03:24
[studabak]
Darn.....
|
Copyright
©
1998-2008
Eagle-Research, Inc.
|
|
