A Research Organization That Develops & Distributes Practical Energy-Saving Methods & Devices

AquaCure Model AC50

$2,499.00
110VAC AquaCure Model AC50 front
220VAC AquaCure Model AC50 frontAquaCure Parts Included

The AquaCure® (Model AC50) is our MOST ADVANCED and user-friendly HydrOxy for Health machine.  It has several features that our customers were asking for.  Like easily adjustable gas volume and an hour meter.
We added a Tower Cap which makes the AquaCure simpler to use and even more reliable.

The AquaCure can generate up to 50 liters per hour (lph) of mixed hydrogen and oxygen gases.

This mixture of gasses has MANY trade names.  
For the purpose of AquaCure we’ll call this gaseous mixture HydrOxy.

The AquaCure is LOADED with SAFETY features (see below).

The AquaCure is a practical, reliable and versatile HydrOxy electrolyzer (generator) that should give you years of trouble free service.  

The AquaCure can be used continuously with minimal maintenance
(just add pure water as needed and clean it at least once a month).

For LEGAL REASONS we need to state up front that the AquaCure is NOT yet defined as a MEDICAL DEVICE and therefor cannot legally be recommended for human use.  
Legal uses would be for plants, fish, birds and mammals.  

Hundreds of scientific studies have proven that it is safe for plants and animals to use for drinking and breathing.  Current studies are proving that humans are having all the same benefits proven on Plants and Animals but until we get medical certification we cannot (for legal reasons) recommend it for human use.
Note: A study of all the studies (including on humans) shows NO negative side effects of hydrogen, only positive benefits.  See our full Medical Disclaimer here:

 

POWER REQUIREMENTS
The AquaCure is 110-125 VAC 60 Hz (North American standard)

IF you want a version compatible with 220-240 VAC 50 Hz,
STATE THAT IN YOUR ORDER COMMENTS.  
We have the 'international version' in stock but this sales page doesn't yet have that 'feature' as an option, so just state that you want the international version in your order comments so the mail room will get the correct version to you.

Note that the 220-240 VAC version has a mechanical timer switch instead of an electronic one because that's the ONLY version of timer we can acquire in North America that is compatible with 220-240 VAC.  the timer switch does have a 'continuous' option.  It will work fine, as is, but you can trade it out for a local timer switch (if you wish) once you receive your AquaCure. 

 

ONLINE RESOURCES
AquaCure comes with access privileges to an online AquaCure Resources, which will give you instruction videos, tips, options and (quite frankly) anything we can think of to enhance your user experience.  The online Resources are updated as needed to assure that you will always have access to the most recent information.

 

LIFETIME WARRANTY
Warranty includes parts, labor and shipping if issue is manufacturer related.  We've been in business since 1984 and expect to be in business at least another 20 years.

If Warranty is invalid (because of user or shipping abuse), we will still repair any issues for lifetime if purchaser pays for parts, labor and shipping. 

 

100% satisfaction Guarantee

SATISFACTION GUARANTEE: We can't guarantee any particular result because every body is different.
HOWEVER, because we are SO CERTAIN you'll be happy with this machine, we have a 100% no questions asked one YEAR money back satisfaction guarantee (from the date you receive the machine).  
You don't need to state a reason if you want to return the machine (even after used for 12 months), just ask for an RMA number and instructions to properly send it back and (once we receive the machine) we'll refund your purchase price (shipping, taxes and duty costs not refunded).

We reserve the right to discount the refund to cover any customer related damage
    (normal wear and tear is expected and will not be discounted).  
Adequately package and insure when shipping to cover potential shipping damage.

 

LOW LIQUID LEVEL SHUTOFF
AquaCure has a low water level switch to automatically shut off the machine if the liquid level gets low.  

Running ANY electrolyzer out of water can cause internal explosions that could lead to damage and harm.  Most electrolyzer manufacturers don't mention this issue because they do NOT have low liquid level shutoff.  
They depend on you to visually check the liquid level frequently.

AquaCure shuts off the gas production when liquid level gets low, so no danger condition can exist.  AquaCure also has a low level alarm and indicator light, so there is no question when the liquid is low.

Low level control also allows the AquaCure to be used as an oxygen source for Mammals needing additional oxygen...
... with the additional benefit of getting hydrogen (something an oxygen concentrator or bottled oxygen can’t do).

Liquid level control is REQUIRED in applications where the electrolyzer is going to operate unattended for long periods of time; for examples:

  1. When needing extra oxygen all night (also gives hydrogen and ExW). 
  2. Using HydrOxy to continuously bubble water for hydroponics / aquaponics. 
  3. Automatically feeding HydrOxy to a furnace for combustion enhancement.
  4. Creating 'NEW WATER'.  New Water is water that's had its memory entirely erased and the things that you can do with it (like programming for health and transmutation) are astounding!

HIGH LIQUID LEVEL SHUTOFF
The AquaCure Model 50 has a high water level switch to automatically shut off the machine if the liquid level gets high.  

If electrolyzers get over-filled they can spit lye out into your breathing gas or drinking water.  Also the high level sensor allows future upgrade of automatic water fill.

Over-filling can be caused by a failed anti-backfill system, so the high liquid level shutoff is also a backup safety feature.

 

EXTRA RESERVOIR
We've added a 'reserve' tank to the machine, so it can operate for hours longer between 'refills'.  This is needed when using the AquaCure for applications requiring continuous use.  At 100% gas production the AquaCure Model AC50 can go 10 hours on a fill; if 'breathing' at 40% production, the AquaCure can go over 24 hours on a fill.

 

ANTI-BACKFILL
The AquaCure has an advanced 'anti-backfill' feature, that reliably prevents the water in the filter, humidifier and bubblers from 'back-feeding' (getting sucked back) into the electrolyzer upon shutdown.  
Many electrolyzers do not have this feature and/or the 'feature' isn't reliable.  

Backfill isn’t ordinarily a 'big problem’ in itself...
EXCEPT it can cause the AquaCure to be over-filled, resulting in lye ejection.
 
Tower Cap pre-filter  
The main purpose of the Tower Cap is to prevent lye from leaving the AquaCure.  It is 'tall enough' that the lye mist tends to settle out and (mostly) pure gas comes out of the top of the Tower Cap.

Humidifier
The function of the Humidifier is to filter out any residue of lye (NaOH) that comes out of the machine with the gas.  It normally does a really good job.  If there is not enough liquid or if it isn’t changed often enough, this function becomes compromised.

GAS VOLUME
AquaCure Gas Volume is sufficient (~ 50 LPH) to ‘charge’ water quickly and supports the 4 treatment protocols (plus the potential of NEW water).

1. Bubble (infuse the water with HydrOxy) for healthful drinking and for feeding to plants and animals.  Can also be used to enhance hydroponics, aquaponics, fish growth, etc.

2. Bubble (infuse the water with HydrOxy) for topical treatment of skin issues and wounds,

3. Bag HydrOxy gas for external treatment of skin, wounds and various pain relief (like arthritis and carpel tunnel).

4. Direct BREATHING (inhalation) of HydrOxy gas (hydrogen / oxygen mixture), to efficiently put the hydrogen directly into the blood for fast, efficient whole body hydration.

5. There are 'developing application' protocols that use 'NEW WATER' that is generated by collecting the condensation of the HydrOxy flame.  The AquaCure is designed to 'make' New Water (using the correct attachments).

 

GAS VOLUME ADJUSTMENT
SAFETY NOTE
:  While breathing some hydrogen has been proven beneficial in hundreds of scientific studies, do NOT want to breathe TOO MUCH hydrogen volume (> 4% in air), because higher concentrations of hydrogen are potentially explosive and you do NOT want an explosive mixture of anything in the lungs!

The AquaCure Model AC50 is designed to allow easy regulation of the volume of hydrogen inhaled... Keeping the volume below the combustible limit in any sized Mammal (you'd want to reduce the gas volume for smaller mammals). 

MOST other hydrogen for Health options out there are either do NOT have gas volume adjustability or the adjustability is difficult.  THIS IS one of the biggest differences between the AquaCure Model H160 and the Model AC50.  

The Model H160 was restricted to about 18 lph of gas production to keep the users safe.

This AquaCure Model AC50 can have FULL GAS PRODUCTION for all applications except breathing, whereby the gas production can easily and appropriately be reduced to keep the mixture breathed 'non-explosive'.

 

TIMER/ON/OFF SWITCH
AquaCure has a timer switch, for convenience and efficiency.  Treatments can be easily timed so no gas is produced beyond timing needed.
The timer switch also has a 'continuous' setting, so that HydrOxy can be produced for extended times (until the low level switch shuts it off).

 

FULL SHUTOFF SWITCH
This switch completely shuts off power to the AquaCure.  Most other electrolyzers only shut off the 'power' wire (like the timer switch would), leaving the neutral wire connected to the Grid.  For safety, we shut off BOTH the power and neutral wires.

 

ATTACHMENTS that normally come with the machine (see video).

1.  2 of Nasal Cannula for Inhalation; (also used for bubbling tube and/or bagging hose).

2. 1 of Humidifier (to scrub HydrOxy of any possible lye mist) + attachment hose

3. 1 of Soft Silicone HydrOxy Spot Applicator (with hose and adaptor)

4. Basic Operation Manual (updates, upgrades, additional information in the Resources).

5. Medium Bubbler (with hose from Humidifier)
So you can infuse your drinking water AT THE SAME TIME as breathing the gas. 

6. Additional bubbling stone,
so that you can bubble the HydrOxy into other containers of water.

7. Tower Cap (with check valve installed) 

8. Humidifier holder

 

OPTIONAL ATTACHMENTS (you can order in addition to the above)
We don't have individual order pages set up (yet)
So for these additional options, use the general purchase page) (purchase units at $1 each to cover the 'extra' cost of the options)
then (very important)  tell us what you want in your order comments (else we won't know what the 'extra' money is for!

So for example, to buy an extra cannula, which is $5.  Go to the general purchase page and put 5 units (at $1 each) into your shopping cart.  As you check out (with both your AquaCure and the 'general purchase units' in your shopping cart), write in the 'order comments' field what the extra money is for, so the order room will know what to put in your box.

Some of the items below are already included with the AquaCure, but are listed in case you want extras.

2. Extra nasal Cannula(s) (for Inhalation): $5
Good to have extras for more people to use, and you'll want to trade them out occasionally as they get 'snotty'.  You can clean them for awhile using alcohol solution.
Note: Used cannula hoses are still useful (cut off the cannula) for bubbler, spot applicator and torch fuel-gas hoses.

3. 25 foot Cannula Extension hose, which allows people to walk around while breathing: $10.

4. Extra Oxygen Humidifier: $15 

5. Extra Oxygen Humidifier attachment hose $10

6. Extra Soft Silicone HydrOxy Spot Applicator: $10

8. Extra Water Infuser/Ionizer Bubbler stone: $4
(for bubbling water in container of choice).

9. Electrolyte (lye) Powder (each bottle enough for 2 fill): $14

10. Extra Medium Bubbler bottle (assembled): $20

11. Large Bubbler Jug (assembled): $22

12. Bubbler attachment hose $3

13. Bubbler parts kit: $9 
(so you can make your own Big Bubbler from your own bottle(s)).

14. Leg bag: $20 (still trying to find a low cost option)

15. Arm bag: $20 (still trying to find a low cost option)

16. Mini-Torch that you can fuel with HydrOxy: $20
(comes with two orifice sizes). You can do amazing things with the HydrOxy as a torch fuel-gas.  
Manufacturers, jewelers and artists (that discovered it) have LOVED this gas since 1964.
It's been one of the most under-appreciated and under-utilized technologies in America.  The Orient has fully embraced it.

17. Extra AquaCure Operation Manual: $15
For people who lose theirs.

18. Registration to AquaCure Online Resources: $200
Registration is automatic and INCLUDED when you purchase an AquaCure from us... But some people acquire an AquaCure (as a gift, for example) and want to have access to all the 'extra' information, videos, etc.


HydrOxy is BIG in Asia mostly because of the COST to build the machines in America.  For example, this company has made HydrOxy machines since 1964 and their machines do NOT have the same safety standards as the AquaCure design.  To implement ALL my safety features, I estimate they'd need to retail their machine at >$5000.00.

I've gone to Asia and imported a 'basic' reasonable quality electrolyzer (known as the VING) to use as the AquaCure 'chassis'.  
I then tear it completely apart and upgrade it with all the safety standards on this page (Standards I've learned from building and selling thousands of practical, efficient and innovative electrolyzers since 1984)...  
and this allows me to sell a NEW SAFER, high quality machine (which I re-name AquaCure) at <$2,500.  

This low cost AquaCure is a 'game-changer' because now most people can actually afford to use the amazing HydrOxy gas safely in their own home (for their plants, birds, fish and mammals).

 

SAFETY CERTIFIED
AquaCure has long life, reliable electrical and electronic components and electrolyzer chamber.  Do NOT assume that because it 'looks' like a VING, that it is a VING.  It is significantly upgraded (at a cost several times higher than the VING retail).

AquaCure is CE safety certified, which I've then UPGRADED to pass CSA/UL standards.
Some manufacturers try to bypass this (expensive) certification by claiming that all components used are safety certified and while this is good (if true and includes the electrolyzer chamber too), it does NOT mean that the MACHINE as a whole is safety certified.

There’s no USA law that states any machine needs to be safety certified to be sold, but many business insurance plans require ALL equipment used in a building be safety certified.
If there is a fire, etc. and there is a SINGLE piece of uncertified equipment in the building (even a light switch that did not cause the fire), their insurance becomes invalid, even if they had properly kept up their payments.

Besides, wouldn’t YOU feel more secure using equipment that has been completely and independently inspected, tested and SAFETY certified to rigorous industry agreed standards?

In addition to all the above, we do our OWN multi-step testing on every single AquaCure machine, so there is NO QUESTION that it will perform perfectly for you.

 

OVER-PRESSURE SAFETY
AquaCure has a 2.5 psi electrical shutoff AND an over-pressure gas relief.  

These are IMPORTANT safety factors because when water is turned into gas, it expands and  ‘wants to’ take up 1800 times more space.  If confined to a specific volume, (enclosed container without release) the internal pressure rises until the machine bursts and/or explodes.

If the HydrOxy is used as created, on-demand, there should never be a case where the pressure would rise too high…

BUT what if the gas output hose gets trapped (like pinched under a chair leg, as happened to me) or gets kinked under a pillow as someone sleeps…? 

Over-pressure control is an important SAFETY feature.

Further, over-pressure control (along with an appropriate torch and backfire filter) then allows the HydrOxy to be safely used to fuel a torch; a nice additional useful feature to have.

NOTE: The original China basic chassis (VING) comes with 15-20 psi pressure, which is (in my opinion) absolutely DANGEROUS!  
I've tried to tell them this but they arrogantly believe no one can 'improve' on their design.  
Because of my DECADES of research and experience with HydrOxy, I KNOW HydrOxy is MUCH MORE explosive as its pressure rises.  
At ambient pressure, a pop bottle can contain a HydrOxy explosion.  As the pressure rises, the explosion is logarithmically more powerful and at 20 psi, it's like holding an M80 firecracker.

So I've changed their pressure switch to MY safety standard of ~ 2.5 psi, which, when combined with my other technologies, solves all the issues that demand they use up to 20 psi.  I do this for YOUR safety!

 

BENIGN ELECTROLYTE
AquaCure uses a lightly caustic electrolyte mixture designed to achieve practical efficiency with minimal foaming and to promote long internal plate life. 
(about 4 ounces of lye in about a quart of water).  
This mixture IS technically caustic but can be safely used if appropriate care is taken.  It's about as caustic as dish soap.

TESTIMONIALS
We've been selling ER50 electrolyzers optimized for health since 2007.  AquaCure is a new product for us, so we don't yet have the articles and testimonials filled out specifically for it.  To see what HydrOxy (Brown's Gas) has done for others, see the testimonials at the bottom of the ER50 Basic Kit sales page.

LEGAL DISCLAIMER: 
THE STATEMENTS ON THIS WEBSITE HAVE NOT BEEN evaluated BY THE FDA, AMA, CIA, FBI, ATF, NSA, DHS, ETC.

~ Just assume what we have to say isn't approved by ANY government agency, medical organization or pharmaceutical company.

Information and Products on this website are not intended to diagnose, treat, cure or prevent any disease. If you are pregnant, nursing, taking medication, or have a medical condition, consult your physician before using our products. See Full Disclaimer on FAQ page.

 

Ask us (in separate email) about how to be a SALES REPRESENTATIVE of AquaCure.  Don't ask questions on your order form because the mailroom has no way to answer you.

Or, if you want to be a MANUFACTURER of HydrOxy machines (for your own business and sales)?  
I can teach you everything you need to know to successfully duplicate the AquaCure machine. We would negotiate a royalty agreement that would start with an upfront deposit.

Due to (present) manufacturing development and market studies, shipped product may look slightly different from depicted.  Product purchased now will be delivered ASAP.  We are increasing our manufacturing capability to reduce this delay but more and more people keep buying :))).

SKU ER1-D1-0010,
24 lbs (shipping weight), 18"Lx16"Wx14"H (shipping box size),
The AquaCure itself is about 12 inches high (excluding the 10 inch Tower Cap), 12 inches long and 9 inches wide

International orders are shipped from Fort Erie, Ontario Canada.

For people who find the upfront cost of AquaCure high for their budget, PayPal offers (to qualifying people) a financing option.

The financing is 6 equal monthly payments + a small finance fee.  
To get the financing, just purchase the product using the PayPal option as you check out (you'll need a PayPal account) and (if you qualify) the financing option will automatically be presented to you during the normal checkout (payment) process (BEFORE you actually pay).

Questions about the "Bill Me Later" PayPal financing program should be directed to PayPal Customer Support at (866) 528-3733

5
Your rating: None Average: 5 (1 vote)
Guarantee All Eagle-Research products are sold with a satisfaction guarantee. If you are dissatisfied for any reason, return the product(s), in resaleable condition, within 60 days of receipt of the product(s) for a full refund of the product(s) purchase price. Shipping and handling fees are non-refundable. Virtual Products are non-refundable after initial download.
See Shipping & Returns
PROVEN RESULTS ON FILE FAIR MARKETING DISCLAIMER TESTIMONIAL DISCLAIMER Eagle-Research advocates fair marketing practices in all endevours.  Therefore, in support of government efforts to protect the common good, we have created these icons (left).   Statements on this page may be subject to any or all of these self-policing icons.   Click on the icons for detailed information.
Think Different
Spider Search
Powered Search 
Get Firefox Get Adobe Reader