|
Newsletter
Invitation:
Postings
to the Archive are listed only on the
Newsletter invitation page:
These
newsletters are sent only to people on the
Eagle-Research newsletter list, which is
strictly an opt-in list.
If you
received this email in error you can
unsubscribe using the instructions at the
bottom of this column. If you wish to
communicate with Eagle-Research, send your
email to:
<
>
If a
friend sent you a copy of this newsletter and
you wish to subscribe, see instructions at
the bottom of this column.
If you
know someone who you believe would like to be
subscribed to this unique newsletter; invite
them to view:
www.eagle-research.com
/newsletter/newsletter.html
The
Eagle-Research newsletters are archived, but
the archive listing will always lag by one
issue, to give subscribers first
view.
Note that we
do NOT give out your personal information
without your permission. We may allow
advertisers to put ads in this newsletter, but
only those that support the spirit of the
newsletter.
|
Available in
HTML @:
www.eagle-research.com/newsletter/archive/1999/10_1999.html
EAGLE-RESEARCH
NEWSLETTER: October,
1999
WHAT'S
NEW
Issue
Feature: INVENTOR
ASSISTANCE
SELF-RELIANCE
BROWN'S
GAS NEWS
READER
COMMENTS
COMING
UP
***************************************************
WHAT'S
NEW (top)
I got
a lot of interest in the fuel saver installer
training program. I did not explain it well.
I was training LOCAL people to install, so
that they could go out and make a business
installing fuel savers. The training project
has since been put on hold due to lack of
time on my part. I did learn, however, that
there is a serious interest in being trained
and I will let you know (via this newsletter)
when I can start a formal training program
that is open to everyone.
In the
meantime, several people have self-trained
with nothing more than my manuals and made
good livings. Two of them have now retired,
having made enough money to not have to work
anymore.
Which brings
me to another subject, referrals and
testimonials. About ten years ago I made a
testimonial/referral form that I could send
out to anyone who wanted to see how well
others had done (testimonials) and for those
people who wanted to have someone else
install a fuel saver on their vehicle
(installer list). This was a great help to
everyone but I didn't keep up on it and it is
now seriously out of date.
I am now
reinstating the program and this time will
list the installers on this website (as well
as in a report). Anyone who wishes to
participate (by giving their testimonial and
getting listed as an installer), just ask for
a TESTIMONIAL/INSTALLER application
form. <
>
I expect
that a new list will be available, for those
people who wish to have someone install,
sometime in the early spring.
Our
local HEAT technology project is on hold too,
as the person building it is having other
things happen in his life right now. I am
still advising on three other HEAT
projects.
I'm
now a married man and the wedding was
wonderful. We held it outdoors on a beach and
did it in Renaissance style.
Eagle-Research is moving it's lab to a new
location. The closest USA town is Porthill,
Idaho. This move will make the technologies
advance faster. We also have facilities for
those people who come to help or
learn.
I
also got a LOT of interest in the 'vested
interest' suppression techniques article that
I offered to write. So it is a go, I'll post
it to this newsletter April in the new
year.
Dennis Lee is currently on another nationwide
tour. I seriously recommend that you go to
see the show; not because I think what he's
promoting works like he lets you assume and
certainly not because I think he needs the
support; but because he puts on a great
performance and incidentally makes people
hope. Tour schedule is at
http://www.teslaelectriccompany.com
If you
happen to have a DC ampclamp, you might step
up onto the stage and test the current. He
shows that the current is 1 amp AC, he
doesn't show that the current is also 15 amps
DC.
I am
just finishing writing a book titled
'Water as Fuel, Book 1' and offer it
here for the 'advance' price of $18 (postage
paid), which is $2 off the retail price and
doesn't include the usual $2 postage. The
book will be delivered to advance buyers
before November 12, 1999.
This advance
offer is made HERE first, as one of the perks
of being on the Eagle-Research Newsletter
List. The first production run of the books
will be limited, so advance buying assures
your copy.
'Water as
Fuel, Book 1' is the result of gathering
information for over 20 years and my
experiments to date. There are now several
different ways that you can use water as a
fuel or as a fuel additive for internal
combustion engines. Also, as I was writing
the book, I found several VERY interesting
correlation's that I did not see before. I
have listed these thoughts, so book buyers
will be able to improve on the technologies
introduced. 'Water as Fuel, Book 1' is
now the definitive book on the
subject.
You can
order by going to my website order
form:
http://www.eagle-research.com/order.html
and filling
out your name and address as you normally
would, except to put 'Water as Fuel, Book 1'
in the comments box (because it won't
be listed on the order form until we actually
have inventory). You will automatically get
the $18 advance price and the book will be
sent to you postage paid. Of course, we do
not charge credit cards till the book is
actually shipped and our complete
satisfaction or your money back guarantee
applies as with any of our books. Traceable
and COD fees still apply if you use those
services.
For
those of you interested in BG. I am starting
a special list just for those people who are
actually working with Brown's Gas; regardless
if you are using one of our machines, one you
built yourself or one built by someone else.
If you wish to be on this list send me an
email detailing your machine and the
tests-experiments you've done or would like
to do. This special list is ONLY for BG
experimenters and is intended to assist the
development of the BG technology.
===================================================
Issue
Feature:
INVENTOR
ASSISTANCE (top)
Inventors
are usually a group of people ignorant of
what it takes to actually market an invention
(this includes myself). As much work as it
takes to invent the better mousetrap, it
takes ten TIMES more innovation to market it.
And this is aggravated by the tendency of
inventors to have NO interest in the
mechanics of marketing.
The
inventors biggest roadblock to getting
a product onto the market is usually
himself (or herself). Inventing and
marketing require two entirely different
mindsets and most people don't have the
ability to do both.
The inventor
MUST recognize that there is a huge science
of marketing and team up with marketing
experts or learn how to market his own
product. The problem with teaming up, is
inventors typically have poor people skills
which makes selecting and maintaining a
proper marketing relationship hard. There's
also a LOT of sharks out there that want the
innovation but not the inventor. The problem
with learning how to market your own
innovation, is that the research typically
STOPS while you are marketing, giving your
competition a chance to catch-up to
you.
I can't
promise a 'golden key' solution to the
problems but I can offer some of my
perspective as an inventor that has developed
his own simple marketing strategy and makes a
good living with it. Obviously my strategy
may not work for you, but it will give you
some idea that there are alternatives to the
'traditional' methods.
When I chose
to be an inventor I didn't take a course on
inventing, so the advise I give you was
discovered the hard way. As my experimenting
proceeded, I found that I needed to define my
goals in life, so that my inventing could
work toward them.
My first
goals were to achieve physical and financial
security. My method was to learn enough
skills that I could guarantee my physical
security by not being dependent on anyone
else for my food, shelter, clothing and
warmth; also limiting how much money I
required to maintain a good standard of
living.
As my
business evolved I learned to make money
teaching others to do the same. And then I
learned to care enough about people to WANT
to help them. My skills are now fairly well
developed, I am competent in quite a few
trades and can market my knowledge, skills
and devices.
Now my goals
include developing home-built alternatives to
centralized power, to developing energy
solutions that will allow people to stop
using fossil-fuel and to make sure that these
technologies actually reach the public. After
nearly twenty years of research I'm now in a
nearly unique position to accomplish these
goals.
In the
beginning I also learned that I must impose
some guidelines on my research or I wouldn't
be able to achieve the goals I set for
myself.
My first
guideline is: I DON'T
PATENT
Some reasons
for this are covered on my
website:
http://www.eagle-research.com/nopatent/patfree.html
My second
guideline was to limit my research to a
specific area. I was working on all kinds of
things and getting nothing done. So I chose
to research ENERGY and resolved to work on
methods that both saved energy and gathered
free energy (energy that is not metered and
doesn't harm the environment, like gravity
power). I still work on too many projects but
am working with enough people that something
is getting done on each one.
Free Energy
exists all around us all the time. 'Vested
interest' gathers free energy and sells it to
us. We can already use 'off-the-shelf' free
energy technologies like wind, hydro and
solar power. I understand these
'off-the-shelf' technologies but as an
inventor I concentrate on developing 'fringe'
technologies to the point that they are
practical, so people have more options.
Options that produce power 24 hours a day,
365 days a year, anywhere on the
planet.
The next
thing I had to do was to develop the skill to
decide which projects I was to work on. I
needed to work on projects that I could
reasonably sell before I starved to death.
That developed perspective skill has built
Eagle-Research into a world class Research
and Development organization. The perspective
is to see an innovation from beginning
(concept) to end (people buying it) BEFORE
you start working on it, or at least after
some initial experiments.
If you can't
see a need for a particular innovation AND
the means to market it, then it is not wise
to pursue it. Then, of course, you also need
to have some realistic idea that you can
actually develop and market the innovation
before you starve (smile).
Writing
books has been an excellent means to achieve
all my goals. My books help people directly
and I make money right away. My copyrights
have MUCH more teeth than a patent and are
automatically upheld in over 100 countries.
By spreading my innovation in print, people
have been able to duplicate my research to
their benefit and their thoughts have often
continued to develop the technology. My books
have introduced me to a special group of
people (of which YOU are one) who are willing
to look at alternatives and to DO something
about the problems they see.
Once my
books have sold a few thousand copies, there
has usually been enough interest that I can
follow up with an actual device. First, the
sale of the books further develops the
technology by customer feedback. And second,
the sale of books creates a market for a
device because people can see it'll work and
want one, but often don't have the time or
tools to build it.
All this
starts a circle where the money from sale of
books and devices goes back into research to
further develop technologies which get books
written and so on.
If you have
innovation that you want someone to see, and
you want to maintain secrecy, then get them
to sign a Non-Disclosure document. I have
some examples and explanations
at:
http://eagle-research.com/nopatent/nodisclose.html
Being an
inventor is very hard work, you usually don't
make lots of money and you're regarded as an
oddity. So you must enjoy the process of
developing the innovation, often this is your
only reward. Good luck (smiles)
===================================================
SELF-RELIANCE
(top)
If you refer
to my message of 07_1999, you will see where
I mentioned that although gold buying by the
public has reached unprecedented levels, the
price of gold was dropping. Combine this with
the fact that large buyers of gold (for
jewelry) have been unable to purchase the
tons they need, the stories of Governments
selling huge percentages of their reserves
and the approaching possible Y2K panic. I
finally thought of something that takes all
these contradictory facts and makes
sense.
I think that
'vested interest' knew that people would
hedge Y2K by buying gold and also knew that
if the price of gold went higher (due to many
people wanting a limited supply) that people
would start to pay extra attention to the
potential problems of the Y2K bug. This would
escalate the problem into panic and 'vested
interest' would be hurt, because 'vested
interest' CANNOT provide cash for all their
debt to the public.
I think that
'vested interest' deliberately manipulated
governments to sell their gold, to provide a
supply to keep the price of gold down. I also
think that large sales of gold have been
prevented for the same reason. This would
help stave off or prevent public panic and
'vested interest' would be safe.
I think that
the supply of available gold has now been
bought out and the rising price will now go
very high (I think over $1,000 per ounce) as
Y2K approaches. People will not want to sell
their gold as in a normal economy, because
they didn't buy it as an investment, but as a
hedge against Y2K. These are people who know
enough not to sell their lifeboat when they
know that there is a serious possibility that
there is going to be a flood. The price rise
will be limited only by those people who see
a chance to recoup their investment by
selling a portion of their gold.
I repeat: A
large portion of the world's gold is now in
private hands. Your chance to buy your share
at reasonable prices is now past. Your chance
to buy any reduces as Y2K approaches. You can
still invest in real goods, items as simple
as toilet paper may be important and it
actually makes sense to buy such items in
advance and in bulk, even if only for your
own use.
Remember I
say two things:
1) Y2K bug
IS going to cause problems, some big ones, a
lot of small ones. This is going to cause
some sort of a depression. The government may
attempt to buy their way out (inflation) and
there will almost certainly be military
enforcement involved. I hope to have links to
appropriate sites set up soon.
2)
Regardless if you believe that Y2K bug will
affect anything, the fact that many people
think that the Y2K bug MIGHT affect the
economy, WILL cause an effect on the economy.
People are buying things this year and
stockpiling. A lot of different scenario's
could happen because of this, which I won't
discuss now.
My advise is
to prepare as our 'Do-it-Yourself
Crisis
Survival'
book details. In doing this you actually GAIN
security while saving money.
I received a
statement (September 13, 1999) from one of my
banks that made me chuckle but also made me
think to warn you (again) about the WORDING
of Y2K compliance.
This
statement came from the Bank of Montreal in
Canada. Banks in Canada need many billions in
assets before they can be a bank, thus in
Canada there are only a few banks that have a
lot of branches. So a statement from them is
a powerful thing; I wish I could show you
this brochure . . . it is a wonder in
misdirection and calculated
emotion.
It states
"100% of Bank of Montreal critical systems
and business operations are prepared for the
Year 2000." Note the word 'critical' and
refer back to my message (see archive
07_1999), where I explained how 'critical'
means about 10% of the actual businesses
systems. Do you see the misdirection here?
They do not say ALL, they say 'critical,'
there is a BIG difference and you NEED to be
aware of it.
They also
point out how dangerous it is to have your
money as cash; I assume in an attempt to
prevent people from taking out a hedge. It
has already been calculated that if 5% of the
population each took out $500, the banks
would not have enough cash to give them. This
is why they MUST issue the strongest
assurances that their lawyers will
permit.
Having
assets is NOT the same as having cash. Banks
lend over 20 dollars for every dollar you
have in the bank (called fractional reserve
banking), this is computer generated 'money'
and never did exist as cash; so if everyone
came in for their cash, there is only yours
and twenty other people will want it
too.
The banks
are also making very strong statements that
your money will be SAFE in the bank, that it
will not be lost. Of course this is true as
it's ever been but assures people without
addressing the issue. The issue has never
been that the data would be lost. The issue
is that the data may NOT be able to be
properly ACCESSED!!!!! Yes, your money is
safe but can you get it?????
Now I'll
quote some of the disclaimer of the bank
statement:
"We are
providing you this information . . . without
any responsibility on the part of BOM Group,
and . . . on the understanding that you agree
that BOM Group has no liability to you for
providing this information, whether or not
you rely on it."
?????
Doesn't that make you feel all secure and
snugly?????
My advice is
to remove a significant amount of your money
now. I do not expect most of you to do it,
because it is hard to hedge against the
system that's been so secure for you. I'm
personally thinking this way; if I have the
cash then I can spend it regardless if the
banks are running or not.
I buy fire
extinguishers for the same reason: I don't
expect to have to use them, but if I do then
I've got it. By the way, I've personally
saved five vehicles and three homes with fire
extinguishers. If you don't take some cash
out NOW, there may not be cash there when you
need it. But maybe nothing will happen
(smile), are you a gambler?
My advise is
to stockpile a bit of food (use your money
while there is food). If nothing happens, you
have lost nothing; even gained a bit because
you bought tomorrow's food at today's prices.
If supplies become scarce, even for a few
days, then a little supply will be a great
value to you.
My research
on Y2K shows me that there are ABSOLUTELY
going to be problems, the only question is
how big the problems will be and how we deal
with them. Being self-reliant is good no
matter what. I don't predict the end of the
world, but I do predict an avalanche of
problems that will affect everyone, some
more, some less. For those that know the
quote, these will be "interesting times." I
expect most problems will be fixed or
bypassed in a 'short' time and life will go
on; during that 'short' time it will pay to
be self-reliant.
My friends
in Fort Erie have a notice in their hands
from their local utility, Buffalo Hydro, that
states 'expect disruptions' concerning Y2K.
This is one of the original power generation
stations ever built in the USA. I have
customers that have reported similar
statements from other utilities. It is the
extremely rare utility that will sign a
liability affidavit that guarantees that they
will not lose power due to Y2K related
events.
We have
written 'Do-it-Yourself
Crisis
Survival'
to help YOU and your loved ones prepare in
the least time and at the least cost, for ANY
crisis (not just Y2K). We at Eagle-Research
want YOU to be happy and comfortable no
matter what.
Our local
preparedness center has helped us a lot.
Check them out:
Northdoorway
Family Preparedness Center
visit at:
www.northdoorway.com
contact at:
< >
call at:
1-888-522-2999
===================================================
BROWN'S
GAS NEWS (top)
The
information gained by individuals testing
Brown's Gas and sharing that information with
us continues to grow. A lot of people have
built their own Brown's Gas machines and
quite a few (around the world) have now
purchased the ER1150 Water Torch.
One very
important note that has come up is: Brown's
Gas will explode all by itself (no spark
igniting it) if there is a sharp point in any
container that has the gas in it, the
potential of this 'self-ignition' increases
as pressure or temperature increase.
Evidently there is enough 'static' electrical
charge potential difference on a point or
sharp edge to ignite the gas. Remember the
gas is an electrically charged water, so
there's a lot of electrical potential just
waiting to be released. Be sure your Brown's
Gas containers and electrolyzers have all
smooth, rounded edges inside
them.
=====================================================
READER
COMMENTS (top)
George,
thanks for the quick response. I and a friend
have listened the Lee internet presentation
and did not have good feelings about
it.
We have
spoken several times the last couple of years
and you have been the most direct and
practical experimenter I have had the
pleasure to meet. I am already on your news
letter list and am looking forward to testing
and contributing to your efforts. I have
built and tested several of your devices with
complete success each time.
Good luck in
your current and future efforts.
Rick
Reynolds
---------------
Dear Mr.
Wiseman,
I am a good
engineer. Also a scientist and a
physicist.
YOU are a
good engineer. Also a scientist and a
physicist.
We both know
about would-be perpetual motion
machines,
scams, and
frauds.
Dennis Lee
must be a pretty good engineer, BECAUSE
he
is able to
make all these demonstrations LOOK
LIKE
he is making
energy out of thin air. What an
enormous
FRAUD he
is!!! Give him hell!!!
You are soon
getting some people on YOUR side - maybe we
can help.
HOLD ON! We
can give him hell, all together!!
Best wishes.
/rap / Robert A. Pease, Engineer.
---------------
Thank you,
George, for the Newsletter.
Most
inventors lose their invention because they
are unaware of the background to our daily
life - who pulls what strings.
For some
years I kept people posted on what was going
on around us by holding meetings. I am still
as uptodate as anyone on this continent, but
instead of meetings, we hold telephone
conversations, during which we counteract
much of the evil going on in this
world.
It occurred
to me that if you have a situation where you
expect, or are having, opposition we could be
of assistance. Write and tell me about it,
who the individuals/groups/corporations
involved are and we will see to what extent
this can be negated. We do not do anything on
our own, incidentally. And there is NO
charge!
For ongoing
'background' information the world's leading
source is "The Spectrum" (877-280-2866 for
subscriptions). The information over the last
decade has been quite remarkable and more
precious than gold .....
........Keep
up the good work!
MILSON.
---------------
Hi
Folks!
NON-DISCLOSURES
AS LEGAL ENTRAPMENT
Saw the need
for this...I know after hearing that story, I
certainly
will learn
from it;
http://keelynet.com/interact/archive/00000531.htm
Might be a
good warning to share with anyone else you
know who might be
into sharing
information.
Jerry Wayne
Decker / < >
http://keelynet.com
/ "From an Art to a Science"
Voice :
(214) 324-8741 / FAX : (214)
324-3501
KeelyNet -
PO BOX 870716 - Mesquite - Republic of Texas
- 75187
===================================================
COMING
UP (top)
The
December/99 issue will feature some Free
Energy 'rumors' I call them rumors till I can
prove they work through my own experience. If
anyone has rumors to share, please do so.
Let's track down these inventors and give
them the assistance they need to produce
viable alternative energy machines.
Warning...proceed with caution on both sides,
inventors and investors, I'll help (with
advise) anyone who asks.
February/2000
issue will be on fuel savers, outlining those
that I consider best for today's automobiles.
Know of any that you'd like evaluated? Drop
me an email.
April/2000
will feature 'vested interest' suppression of
innovation. Any stories you'd like to
contribute are appreciated.
***************************************************
|