|
|
Newsletter
Invitation:
Postings
to the Archive are listed only on
the Newsletter invitation
page:
These
newsletters are sent only to people
on the Eagle-Research newsletter
list, which is strictly an opt-in
list.
If
you received this email in error you
can unsubscribe using the
instructions at the bottom of this
column. If you wish to communicate
with Eagle-Research, send your email
to:
<
>
If
a friend sent you a copy of this
newsletter and you wish to
subscribe, see instructions at the
bottom of this column.
If
you know someone who you believe
would like to be subscribed to this
unique newsletter; invite them to
view:
www.eagle-research.com
/newsletter/newsletter.html
The
Eagle-Research newsletters are
archived, but the archive listing
will always lag by one issue, to
give subscribers first
view.
Note
that we do NOT give out your personal
information without your permission. We
may allow advertisers to put ads in
this newsletter, but only those that
support the spirit of the
newsletter.
|
.
|
Available
in HTML @:
www.eagle-research.com/newsletter/archive/2000/2000_06.html
EAGLE-RESEARCH
NEWSLETTER: June,
2000
WHAT'S
NEW
Issue
Feature: Water
as Fuel
SELF-RELIANCE
BROWN'S
GAS NEWS
READER
COMMENTS
COMING
UP
****************************************************
WHAT'S
NEW (top)
•
Our shop-lab in Creston, BC is
now operational. We have lights over
the workbenches and all of our
equipment set up. It is so nice to
be able to just reach for tools and
DO something :)))
•
We are proceeding with a
'Bessler' style Gravity Wheel
experiment. For people unfamiliar
with this technology, it is an
attempt to move weights on a wheel
to always have one side 'heavier'
than the other; thus allowing
gravity to turn the wheel and having
gravity become a useable power
source.
Our
preliminary research and
calculations led to a 'single
weight' rotary experiment which
turned out positive. However, the
positive was within range of error
for our measuring techniques (of
which we used two and confirmed
several times). Since the result was
positive, nothing is left but to
build the wheel and see if it works.
We've designed the wheel and ordered
the parts.
We've
sent our Gravity Wheel design off to
'peers' for review and duplication.
We would be interested in
communicating with anyone who is (or
would like to be) working on
'Gravity Wheel'
technology.
<
>
•
As a reader of this newsletter,
you are likely aware that we
published the book 'Water as Fuel,
Book 1' some months ago. Our next
book is well on it's way, it is
called the 'HyZor Manual'; we expect
it to be published by
October.
The
HyZor takes one of the concepts
presented in the 'Water as Fuel,
Book 1' and makes it into a
practical technology. As time goes
on, we will do the same for each of
the technologies presented.
The
HyZor is an on-board electrolyzer,
combining our years of Brown's Gas
experimental research, our
automotive technical expertise and
extensive Water as Fuel research to
bring you a PRACTICAL hands-on
Manual that will tell you how to
home-build the world's most
efficient on-board
electrolyzer.
•
I will be speaking at the Exotic
Energy Conference during July/00.
More details at: http://www.eagle-research.com/events.html
=====================================================
Issue
Feature:
WATER
AS FUEL (top)
Since
I would expect anyone interested in
using Water as a Fuel to buy our
very good book that introduces the
subject, I won't duplicate here what
is already in the book. Instead,
I'll bring you up to date on stuff
that I did not include and has been
happening since I wrote the
'Water
as Fuel, Book
1'.
•
I've been writing the HyZor
Manual, which should be published in
October/00. This Manual will detail
how to home-build the world's most
efficient on-board electrolyzers to
help internal combustion engines
achieve higher efficiencies.
As
I've been writing the HyZor Manual
I've come across several studies
that confirm that on-board
electrolyzers have a seriously
beneficial effect on vehicle
performance, combustion efficiency
and extremely lowered pollution
(without depending on 'traditional'
anti-pollution equipment). This is
because the hydrogen acts as a
'catalyst', knocking the
carbon-based fuel apart faster so
there is more complete combustion. I
will include reference to these
studies in the HyZor
Manual.
It's
always made more sense to me to burn
the fuel in the combustion chamber
instead of in the exhaust. I don't
know, is it just me? Would you
rather burn your fuel where it
actually powers your vehicle? Or do
you like paying thousands of dollars
extra for equipment attached to your
vehicle that burns about half of
your fuel in the exhaust? And then
paying thousands of dollars in extra
fuel costs because you need to burn
twice as much to go
anywhere?
•
(rumor) Neodymium has been added
to the list of catalysts that help
split water using low amounts of
power. Evidently sunlight (or
ultraviolet light) associated with
neodymium has been used by Chinese
researchers to split water. New
Energy News; March 1994 "Will Coal
and Oil become
Obsolete?"
•
Although I knew about him, I did
not include Daniel Dingel's work in
the WAF book. He has an
'electrolyzer' technology that
supposedly allows an internal
combustion engine to run exclusively
on water. I do not know enough about
what he is doing to
comment.
•
Another 'Water as Fuel' inventor
not mentioned was Yoshiro Nakamatsu
of Japan. He invented the floppy
disk and the digital watch. He has a
device he calls the 'Enerex' that is
supposed to make vehicles run on
plain water. That's all I know at
this time.
•
David Wallman has continued to
do well in promoting 'Aqua-Fuel'
technology. He presented it at the
Conference on Future Energy
recently. This is making 'City-Gas'
from carbon materials and water, to
use as an alternative fuel. Tapes of
this event can be acquired from
Integrity Research Institute, 1422 K
Street NW, Suite 204, Washington,
DC, 20005, USA.
800-295-7674
•
Likely the most advanced
developer of using hydrogen peroxide
as a fuel is Les Adam of AZ
Industries, who is developing a
helicopter based on the concept. He
presented his technology at the same
Conference on Future Energy as above
and tapes are available.
http://www.futuremag.net
•
I have recently come across a
technology with amazing promise.
It's a reversible fuel cell;
essentially a 'water battery'
with a power to weight ratio 1/3 of
conventional lead-acid batteries.
This would make electric cars much
more practical, as well as storage
of electricity for any use. There is
a little educational kit available.
Check out http://www.ecosoul.org
.
•
There have been advancements on
splitting water using algae. Not
practical yet, but interesting as a
developing option. February 26, 2000
Science News, Volume 157, page 134;
"Power plants: algae churn out
hydrogen".
•
I recently learned of the work
of David Thatcher. He invented a
technology that used an on-board
electrolyzer that allowed vehicles
to get double or triple mileage.
There is no question that it worked;
the question is HOW it worked. I
think it had to be making extra
hydrogen by 'replacement' technique
(which means the plates erode away
during the process).
•
You can find a book (called the
Hydro-Boost Manual) that describes
how-to-build an on-board
electrolyzer using 'replacement'
technique at:
http://www.himacresearch.com
I
will be experimenting with this
technique soon, after we get the
HyZor Manual published. There are
actually several ways that it can be
done; we will sort through the ways
till we find the most practical for
YOU.
In
conclusion:
The
technology to use water as a fuel
has reached a practical stage with
the on-board electrolyzer
enhancement. Using water in a very
high energy form (Brown's Gas) to
enhance combustion of carbon based
fuels.
Another
practical use of water is simple
water injection (covered in 'Super
Gas Saver Secrets'), this has many
of the advantages of Brown's Gas and
can be very simple and inexpensive
to set up. Again, the water
supplements carbon-based fuel for
increased efficiency.
There
are many 'Water as Fuel'
technologies struggling to come
alive. The Darwinian process of
elimination is weeding out those
ideas that are impractical; pointing
out WHY they are impractical so that
inventors know what problems to
solve.
As
we inventors say when something
doesn't work: "Well, it's back to
the drawing board".
:)))))
=====================================================
SELF-RELIANCE
(top)
We
have a minor crisis happening here
in our hometown of Creston, BC. It
seems that even here, in the
Canadian Rocky Mountains, the water
can have problems that cause people
to have to boil it before drinking
it.
Several
years ago, it was a microorganism
that is commonly called 'Beaver
Fever'. This month it is a strain of
e-coli. Water in any community can
become deadly contaminated at any
time. In fact, this is a famous
terrorist scenario and
unfortunately, a likely
one.
The
point is, that it is good to
maintain self-reliance on a regular
basis. Since we regularly keep
supplies of fresh water and we treat
our water in various ways, this
e-coli did not catch us. My Lady
Tenaj, who will proudly call herself
a 'city girl', went into
self-reliance mode smoothly because
we have studied possible problems
and figured out solutions in
advance.
Anything
can happen in you life and SOMETHING
is guaranteed to happen. When
something happens, the prepared
person (even if only mentally
prepared) has the best chance of
staying happy and
healthy.
My
advise is to prepare as our
'Do-it-Yourself
Crisis
Survival'
book details. In doing this you
actually GAIN security while saving
money. This is how we chose to help
as many people as we could in the
shortest possible time. The book
includes information on how to help
yourself even if you did NOT prepare
in time.
Since
we are talking about water pollution
I'll mention another health
hazard.
Chlorine
and Fluoride are deadly poisons that
are used to as a mass weapon of war
and as rat poison; which are harming
the health of nearly every North
American person. There is absolutely
no doubt of this anymore, plenty of
evidence is available to anyone who
looks. In the future, the people who
are now putting these chemicals into
water and products (like toothpaste)
will hang their heads in shame as
they learn how many people they've
helped to an early grave.
The
drama is ongoing near our home as a
local town is struggling against the
government for the right NOT to
Chlorinate their water; insisting
that it is a poison and asking for
permission to use alternative means.
I wish them well.
Already,
most first world nations use ozone
or ultraviolet light to purify
water. These methods are actually
MORE effective and the end result
does not harm you. There are natural
products, like Grapefood Seed
Extract, that are more effective
than any commercial purifier
additive and are completely friendly
to the environment. Check out your
local health food store for
GSE.
North
America is sadly lagging in these
health upgrades and I can only
assume that it is because of the
general public's ignorance of the
danger combined with the needs of
the powerful 'vested interest' to
keep this 'dumping market' for their
industrial waste. Just think, people
BUY this hazardous waste from them
and poison themselves with it. In
another country they'd have to use
some (usually expensive) means to
neutralize these thousands of tons
of hazardous waste.
The
'vested interest' of the drug
companies and the medical system of
North America is another problem
which I recognize but won't comment
about here.
And
bugs don't just come in the food or
water; I'm sure that most of you
have heard of the LOVE BUG and it's
immediate clones that went around
recently.
You
can read about the LOVE BUG
at:
http://www.cert.org/advisories/CA-2000-04.html
Some
of my friends had their hard drives
wiped out. It did not affect us at
all; even though we got several
hits. If you are not prepared then
you get bit and HURT. Some advise to
be prepared in the future,
from:
Patrick
Douglas Crispen,
crispen@NETSQUIRREL.COM
FIVE
YEARS of Searchable Archives at
http://www.TOURBUS.com
Full
article (about the six preparation
points) available at:
TOURBUS
Volume 5, Number 89 -- 4 May
2000
---------------------------------------------
Crispen's
*SIX* Antivirus Rules
---------------------------------------------
•
PURCHASE A GOOD, COMMERCIAL
ANTIVIRUS PROGRAM LIKE NORTON
ANTIVIRUS OR MCAFEE
VIRUSSCAN.
•
UPDATE YOUR VIRUS DEFINITIONS
FREQUENTLY (AT LEAST ONCE A
WEEK).
•
NEVER DOUBLE-CLICK (OR LAUNCH)
*ANY* FILE, ESPECIALLY AN EMAIL
ATTACHMENT, REGARDLESS OF WHO THE
FILE IS FROM, UNTIL YOU FIRST SCAN
THAT FILE WITH YOUR ANTIVIRUS
PROGRAM.
•
TURN ON MACRO VIRUS PROTECTION
IN MICROSOFT WORD, AND BEWARE OF ALL
WORD MACROS, ESPECIALLY IF YOU DON'T
KNOW WHAT MACROS ARE.
•
RUN WINDOWS UPDATE AT LEAST ONCE
A MONTH (assuming you run windows);
(this will update the newest plugs
in your WINDOWS program to block the
security holes that are constantly
being found in WINDOWS).
•
IF SOMEONE UNEXPECTEDLY SENDS
YOU AN EXECUTABLE FILE OR VISUAL
BASIC SCRIPT FILE -- IN OTHER WORDS,
A FILE THAT ENDS IN .EXE OR .VBS --
THROW IT OUT. (Then contact the
person to tell them you've done so
and to make other arrangements if
applicable.)
In
addition to the above I share these
thoughts:
•
Use Macintosh computers, they
are (in my opinion) superior
machines for user-friendliness AND
they are not susceptible to most of
the 46,000 viruses, worms and Trojan
horse programs that are floating
around the web.
•
My brother came up with an idea
several years ago; he put two hard
drives in his computers and put an
external switch on the 'write'
portion of one of them. Then he put
all his programs and operating
system on the 'protected' drive and
turned off the 'write' function.
This meant he could protect his
programs and at the very most would
only have to reformat his 'working'
drive.
Another
idea using today's technology is to
'burn' a CD with your programs and
system, allowing you to operate off
the CD and have your system 'virus
proofed'.
•
Back up (at least once a week)
all your work onto a reliable form
of media that can physically be
removed from your computer. I know
people who back up every day. Don't
back up till you've confirmed that
you do NOT have a virus. Keep
originals of all the programs you
use and your operating system, in
case you need to completely reformat
your hard drive.
You
can make this less work by keeping
separate backups for each type of
work that you do, so that you don't
have to back up things that you
haven't changed.
•
Keep more than one copy of your
backup and keep the second copy
stored completely away from the
building in which your computers are
kept. This second copy should be
upgraded as often as the local
backup.
The
easiest way I've found is to have
two external backups, one that is by
the computer, which you back up when
you do the local backup and then
take it to the external storage to
exchange it with the previous
backup; then you take the previous
backup back to the computer for the
next backup.
•
Do not do anything with any disk
(or file) that arrives at your
computer, till you run a virus
checker over it. Automatic virus
checkers are excellent for this. Yes
it slows you down, but it's good
insurance so be patient with it.
You'll feel much better after you've
caught a few viruses and start
imagining the 'delay' a corrupted
hard drive could cause.
•
It is a good idea to have
dedicated computers connected to the
Internet, that deal exclusively with
Internet stuff. These computers are
not connected to any other computer
except by exchanging information on
disks. This gives an extra level of
security to your system because you
can scan those disks before allowing
information into your actual working
machines.
I've
had at least one deliberate attack
on my computer system through the
Internet. I'd call it an Internet
bomb, because it was designed to
'destroy' my hard drive. I had only
a momentary inconvenience while I
dealt with it. There may have been
others that didn't even reach the
level of my awareness because my
programing took them out
automatically.
•
We have developed the technique
of keeping everything off our
computers except the actual
operating system and some programs.
We use various exchangeable media
(like Zip disks) for different
projects. This not only gives us
another level of security, it allows
anyone to work at any of our
computers on any project. It also
solves the problem of internal hard
drives being too small.
=====================================================
BROWN'S
GAS NEWS (top)
I
just got back from a conference that
explored many applications of
Brown's Gas, in the home, in
industry, for waste reduction and
radioactive neutralization. The
conference was a good one because
several of the most important people
in the Brown's Gas field got
together and shared
ideas.
In
the home, I'd say more work needs to
be done on Brown's Gas storage
techniques. Since it takes
electricity to make Brown's Gas, it
does not make sense to use it to
make electricity again immediately
(you might as well use the
electricity directly). Brown's Gas
technology as it exists today must
use the gas as soon as it is
generated. At this time, I am not
aware of any practical safe storage
method. If a safe storage can be
figured out, the technology already
exists to have Brown's Gas literally
power a home, providing all heating,
electrical and even vehicle fuel
needs. Of course, electricity
already does this simpler, without
the help of Brown's Gas.
Note:
I have unverified rumor that when
Brown's Gas is used in a ceramic
radiant heater, the heat output is
three times what the energy would
have been if the electricity used to
make the Brown's Gas had been used
to directly make heat. This would be
very interesting, if
true.
In
industry, there are enough practical
applications of Brown's Gas to
change industry as we now know it.
The obvious first markets are
applications currently using bottled
hydrogen and oxygen. Then nearly
every application that is using
bottled acetylene, MAPP gas and
propane can be upgraded. We have
developed specialized electrolyzer
technology to seamlessly integrate
Brown's Gas into several common
applications. The companies that
take advantage of Brown's Gas first
will have a significant leading edge
over their competition. I'd also say
that our technology is the first
PRACTICAL technology for applying
the Brown's Gas on an industrial
scale.
As
waste reduction, the market exists
but electrolyzer application
technology needs to be developed to
apply Brown's Gas. Waste reduction
can take place in enclosed
containers that do not let material
or gasses escape till they are inert
to the environment. There also seems
to be a resistance from government
to have hazardous waste eliminated
in this manner.
As
radioactive neutralization, there
are now techniques (using Brown's
Gas) that reduce radioactivity to
background levels in minutes. This
has now been proven in several
locations around the world. There is
no longer any need to transport or
store radioactive waste, it can be
neutralized right at the reactor.
Nuclear Weapons can be
decommissioned right at the
storage.
In
addition to the above, we are
discovering that Brown's Gas itself
seems to assist healing of wounds.
External application of the gas
relaxes muscles and kills anaerobic
organisms. We may be able to use it
to sterilize water for
drinking.
Another
application is to use the Brown's
Gas to 'catalyze' combustion of
carbon based fuels. This works in
both internal and external
combustion. The HyZor is an example
of application to vehicles. We are
also looking at increasing the
efficiency of power plants and steam
generators by increasing the
combustion efficiency of the carbon
based fuels.
=====================================================
READER
COMMENTS (top)
Dear
readers,
I
appreciate the emails sent to me. I
apologize if you do not see your
email here. To keep the newsletter
shorter, I select those that best
represent the emails I get. Thank
you :)))))
---------------
Hey
George,
I
owe you another thanks. Remember
when I e-mailed
you
about if you thought Y-2K was going
to be bad and
you
said "Maybe yes - maybe no. Some
people might
die"
I had a $600 plane voucher I needed
to use soon
and
I was planning on going to Thailand,
Vietnam, and
Laos
in December and January. But your
advise caused
me
to rethink that. I used the voucher
instead to buy
my
Mother a plane ticket to visit me in
California for
Christmas
and to buy myself a ticket to visit
her in
Wisconsin
this Summer. She came and we had a
nice
visit
but I was kind of mad that I missed
out on that
big
trip to S.E. Asia when not much
happened re: Y2K.
But
it was all for the best. My mother
was diagnosed
with
inoperable pancreatic cancer at the
end of
February
and passed away in the middle of
March. I
used
my ticket for this Summer to go home
and be with
her
during that time. I'm so grateful
now I had that
time
with her in December and recently.
It was more
meaningful
than a trip abroad could ever have
been.
It's
funny, and synchronous, how things
sometimes work out.
Cat,
I've
enjoyed your submissions and I know
you must miss your mother a lot. I'm
glad to have inadvertently allowed
you to to be with her one last time.
Your apology is interesting in that
you recognize the synchronistic
nature of life. Have you read 'The
Celestine Prophesy' by James
Redfield?
---------------
I
really enjoyed the last Newsletter
and no it wasn't too long
at
all.
In fact it was very interesting... I
spent a little over 20 years in the
military and have absolutely no
doubt that the Government will
cover-up and supress... I also was
taught through exercise how to speak
to press and to not let others speak
in an incident if I was on scene
regardless of position or rank...
Fortunate I never used that
Knowledge in practice.
Simply
"I can neither confirm nor deny" As
an official statement in spite
of
whatever.
I saw countless weapons officers at
high levels who were absolutely
ignorant except for public
information and certain positions
were consistent in this. I know
cause I had to set up thier files
for inspection then sometimes even
me or someone I worked would inspect
them while filling the office of a
higher authority only for the
inspection. Well this wasn't
dangerous as it may sound but I now
see this was more orchestrated than
laziness as I once
thought...
Don't
misunderstand. I actually feel that
nuclear weapons are safer
than
nuclear
power. They are actually inherently
begnine and require a
great
deal
of resources and knowledge to employ
while nuclear power is
active...
(portions
deleted and Anon to
protect)
---------------
I
tend to believe your view of vested
interests. The occulting of Tesla's
work points that way. A book that
physically traces modern wealth is
"The Rich and the Super-Rich"
(1970s). It reveals if I remember
correctly that 70% of all pecuniary
wealth in the world is in the hands
of about 100 families.
Francis
Pedley
---------------
George,
I
just finished your latest newsletter
an am glad that you were willing
to
address the suppression issue. I
have also known about it for years
and
have
heard several first hand accounts
from inventors. I met an engineer
who was working on a cold fusion
project. One day he received a phone
call from someone who had his family
under surveillance and told him he
had better quit his job now, or lose
his family. He quit immediately
after the phoner went on to describe
the weekly routines of his family
members each week (hair dresser,
little league practice,
etc.).
More
on suppression of cold fusion
at:
http://www.padrak.com/ine/SUBJECTS.html
Just
for the record, here is another
documented story about early
suppression
of LTPC technologies.
A
means for producing pollution free
transportation and electric power
from
kerosene using low temperature phase
change (LTPC) or refrigeration
based
technologies was developed in the
early 1970s by Wallace Minto and
Archie
Gay. These devices are based on a
new application of refrigeration
technologies.
Mr. Minto had refined several
generations of prototypes for
powering
automobiles on a closed loop Freon
driven engine powered by a low
emissions
kerosene burner. This technology was
reviewed in Popular Science Magazine
in October of 1970, where it
reported that he was negotiating
with Datsun for collaborative
production in 1972. Yes, the means
for pollution free transportation
was on it's way to the marketplace
30 years ago. However, Mr. Minto
apparently sold the rights to his
inventions to an anonymous higher
bidder who "disappeared" it.
Mr.
Gay, who had been casually
collaborating with Minto, was
building
LTPC
electric generators. He already had
a $2.5 million stock offering in
hand,
when he too was approached by a
higher bidder. He refused to sell
because
the "buyers" insisted on remaining
anonymous. His refusal was
followed
by two nearly successful attempts at
murdering him and his family,
sabotage
on the assembly line, and sudden and
contrived charges of tax fraud
by
the IRS. His investors withdrew
their money and his refrigerant
driven
generators
never made it to the marketplace.
..
I
think that you are right that
eventually free energy devices and
systems
will break through into the market
place and our every day
lives.
The
Japanese are desperate to have their
own energy independence, and people
like you are beginning to share
their ideas openly. I am grateful to
you for persevering and publishing
your pamphlets. I will be ordering
more stuff from your
website.
Gary
Schwartz
---------------
Dear
George,
I
enjoyed your latest newsletter
dealing with suppression. Very
analythical and easy to understand.
I am puzzled why it happens. Human
life is priceless, which some of our
fellows humans can translate easily
in worthless.
I
have studied a lot on various cancer
treatments, so I cannot deny
information on suppression related
to medicine.
Do
you have any better explanation why
this all happens? Is money
and
power
what moves this world, or is it a
love, contribution and
sharing?
Wishing
you well
Pavel
Pavel,
I
think it will become love,
contribution and sharing one person
at a time. It will be easier when
people no longer have to worry about
warmth, food, clothing,
communication or transportation. To
achieve such goals requires great
dreamers (contributors)who just will
not stop till it
happens.
---------------
George,
Many
thanks for the great newsletter. I
always look forward to receiving
them and wish they came more
frequently. You can never get enough
of a good thing!
Anyway,
I notice that you advocate the use
of water to enhance combustion. Does
this technology work for diesel
engines? Does your book on the
subject show how it can be easily
applied to a turbocharged diesel?
Any advice you could give would be
most appreciated, because the price
of fuel here in the UK is very high,
equal to about $1.30 per LITRE!!
Obviously my intention is to save
money as well as reduce my
emissions.
Many
thanks for your help and good luck
with upgrading your
website,
Paul
Hopewell
Paul,
Yes,
there are several ways to use water
with turbocharged Diesel engines.
You can introduce it as steam, using
the exhaust heat; or vapor-mist by
using the HyCO 2DT technology; or as
Brown's Gas using the HyZor
technology. There are other
technologies being developed that
you can read about in the 'Super Gas
Saver Secrets' and 'Water as Fuel,
Book 1'.
=====================================================
COMING
UP (top)
AUGUST/2000
was intended to feature Fuel Saving
technology. We hoped our
comprehensive upgrade to the fuel
saver section of the website should
be complete. If you know of fuel
savers that you'd like to see
evaluated, drop me an email: <
>. Instead, we feature more free energy rumors and
will feature fuel savers in a future
edition.
October/2000
was to be skipped due to our planned
trip to Australia but the trip got
postponed till October/2001. This
issue will be used to feature fuel
savers, even though our website
upgrade has not yet happened and it
will be some time before it does
happen because other projects are
taking up our time. Sometimes you
just don't get everything done and
you go with what you've
got.
December/2000
will feature Gravity Wheels. Anyone
who has experience with them is
invited to contribute <
> .
*****************************************************
|
   
Copyright
©
1998-2008
Eagle-Research,
Inc.
|
|
